SITEMAP   ::   FAQS   ::   HELP
TELEPHONE : (506) - 726 - 8805



 mpg cart

fax

Click to contact Us, Toll Free. You will be asked to enter your number and our system will connect with you quickl to the telephone number you supplied. Absolutely Free of Charge!


 img1Huge Impact on the environment, For every treated Engine on this planet which MoreMPG™ reduces soot's, NOx, Carbon Monoxide, Co2 and PM's all harmful emissions not only fuel savings but also impacts more areas that we sometimes overlook, MoreMPG reduces wear and tear and gain the out-most performance from your engines and to all applicable equipment and industrial use, effects less breakdown, less parts are needed, bringing your operation cost down significantly. Keep you fleet longer and equipment more reliable, and running like New with our simple low cost MoreMPG™ maintenance program. From engines to automatic and manual transmissions, Gearboxs, hydrostatics, hydraulics, differentials, reduces electrical consumptions to hydraulic pumps, gearboxes, air conditioning units and many many more applications.

MyLiveChat

MoreMPG Material Safety Data Sheet

Tweet this
Tweet this

Because product handling and safety information is critical to your business, MoreMPG ™ provides comprehensive Material Safety Data Sheets (MSDS) for your convenience. MSDS is also available for download. FOR FASTER DOWNLOAD RIGHT CLICK AND (SAVE LINK AS).


Effective Date: April 7, MATERIAL SAFETY DATA SHEET MoreMPG
2010 MoreMPG™
(MMPG)
 
 
 

SECTION 1:

  CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: MoreMPG™ / GearMAX™ Company: MOREMPG ™
Description: Green/orange translucent  Address: 688 RUE PINET
Liquid
BERTRAND, NB, E1W 1L4
CAS Number: N/A (Mixture)
 
  506-720-0650
NFPA:   Emergency
(0 = least, 4 =   Numbers: 506-726-8805
Extreme)    
Health 1
Fire 0
Reactive 1    
Special 0    
  SECTION 2:  
  COMPOSITION / HAZARDOUS INGREDIENTS
Chemical Name: Modified Synthetic Organic Monomer Polyalkoxylate
CAS Number: Trade Secret    
OSHA PEL: 2mg/m3* C    
ACGIH TLV 2 mg/m3 * C    

* = Total Dust

C = Ceiling Limit

OSHA PELs obtained from 29 CFR 1910.1000. ACGIH TLVs obtained from 1993-1994 Threshold Limit Values for Chemical Substances and Physical Agents. In keeping with MoreMPGcontinuing commitment to safety and the environment, we are providing this MSDS as a service to our customers. The emerging family of MoreMPG™ products are (and will be) classified as non- hazardous under OSHA’s Hazard Communication Standard (29 CFR 1910.1200).

  SECTION 3:  
  HAZARD IDENTIFICATION
Emergency Overview: Product is slightly clear to clear translucent liquid.
  Product presents no unusual hazard if involved in a fire; presents little or no hazzard
  if spilled, but is slippery, so caution is advised to avoid falling.
  All Information stated herein concerning health effects is for the non-diluted from MoreMPG™.

Potential Health Effects:

Skin Contact:

Product may cause slight irritation and rash with long exposure

  Eye Contact: Product may cause irritation and possible damage

Inhalation:

Mist may be corrosive to mucous membranes and respiratory tract.

  Ingestion: May be reactive to mucous membranes or gastrointestinal tract
   Carcinogencity:

Nothing contained in this product is found on the OSHA, NTP and IARC lists

MoreMPG  page 1
Material Safety Data Sheet    
   SECTION 4:
  FIRST AID MEASURES
Skin Contact: Wash exposed areas with water for 5 to 10 minutes. If irritation occurs,seek medical attention
Eye Contact: If exposed, flush eye for 10 to 15 minutes with copious amounts of water and SEEK MEDICAL ATTENTION IF NECESSARY.
Inhalation: If irritation occurs, SEEK MEDICAL ATTENTION IMMEDIATELY
Ingestion: If ingested, dilute by drinking large quantities of water or milk. DO NOT
   SECTION 5:
  FIRE FIGHTING MEASURES
Flash Point: > 300°C (Pensky-Martens Closed Tester Method)
Flammable Limits: LEL: None UEL: None
Extinguishing Materials: Non-combustible. Use extinguishing material appropriate to surrounding fire conditions
Unusual Fire and None known
Explosion Hazards: None known
Fire Fighting Equipment: Firefighters are to wear full protective equipment
 

 SECTION 6:

ACCIDENTAL RELEASE MEASURES

Product is slippery when spilled onto the floor. To clean up spill, wear chemical resistant slicker suit, rubber gloves and rubber boots. Apply absorbent material such as vermiculite to the spill area to contain and absorb the spill. Scoop material into pail or drum. Thoroughly wash area with water. Dispose of material in compliance with Federal, State and Local regulations  

 

  SECTION 7:
  HANDLING & STORAGE
Handling: Avoid contact with eyes and skin. Avoid prolonged or repeated contact with skin. Ensure that containers are properly secured before moving, ALWAYS WEAR GLOVES AND EYE PROTECTION.
Storage: Keep container closed. Store at room temperature to avoid freezing. The appearance of fine sediment can occur after a period of time.
MoreMPG™ Page: 2
Material Safety Data Sheet
    SECTION 8:  
  EXPOSURE CONTROLS / PERSONAL PROTECTION  
Engineering Controls: Control storage area temperature to avoid subjecting product to freezing
     
Eye Protection: Wear safety glasses with side shields or safety goggles when working with product
     
Skin Protection: Wear coveralls, rubber gloves and rubber boots  
d
Respiratory Protection: When product is used properly, respiratory protection should not be required
     
    SECTION 9:  
  PHYSICAL AND CHEMICAL CHARACTERSTICS  
Appearance: Clear Grey Liquid Vapour Density: N/A
Odour: None Vapour Pressure: <0.1 @ 100°F
Physical State: Liquid Boiling Point: 210°F Non-Diluted
pH: 7.0 to 8.0 (Melting) Freezing Point: 32°F
Solubility in Water: Miscible Specific Gravity: 1.25 +/-
    SECTION 10:  
  STABILITY & REACTIVITY  
Stability: Stable Decomposition Products: When heated to 7000F,
      product decomposes
      to original constituents
Incompatibility: None Established Hazardous Polymerization: None Established
    SECTION 11:  
  TRANSPORTATION  
DOT Hazard Classification: Non-Corrosive Liquid  
IMPORTANT NOTICE      

All information contained within this Material Safety Data Sheet is based on data and sources believed to be reliable. However, it is presented without any guarantees or obligations for the accuracy of this data or the results to be obtained on the use thereof. Conditions of use are beyond MMPG’s control and therefore users are responsible to verify this data under their own operating conditions to determine whether the product is suitable for their particular purposes and they assume all risks of their use, handling and disposal of the product or from the publication or use of, or reliance upon, information contained herein. This information relates only to the product designated herein, and does not relate to its use in combination with any other material or in any other process.

Product is slippery when spilled onto the floor. To clean up spill, wear chemical resistant slicker suit, rubber gloves and rubber boots. Apply absorbent material such as vermiculite to the spill area to contain and absorb the spill. Scoop material into pail or drum. Thoroughly wash area with water. Dispose of material in compliance with Federal, State and Local regulations


 

MoreMPG™ Page 3
Material Safety Data Sheet  
Convert PDF to HTML using PDF2HTML Online